3M™ Direct Bury Splice Kit
DBO/B-6 and DBR/Y-6
| 1.0 |
SCOPE: |
|
1.1 |
The 3M™ Direct Bury Splice Kits
are used to electrically connect two
or more pre–stripped copper wires
and moisture seal the connection
for direct burial. It includes the 3M
"Performance Plus" Electrical Spring
Connector and a high impact,
UV-resistant polypropylene tube
prefilled with moisture-resistant gel.
They are ideal for splicing wires and
cables in irrigation and Low Voltage
Lighting systems. For residential,
commercial, golf, and other green
industry applications. |
|
|
|
| |
|
| 2.0 |
PACKAGING DETAILS: |
| Paige Part Number |
270672 |
270673 |
270674 |
270675 |
| 3M Part Number |
DBR/Y-6 Bulk |
DBR/Y-6 Kit |
DBO/B-6 Bulk |
DBO/B-6 Kit |
| Description |
Bulk pack of 100 each gel-filled tubes and twist-on connectors. |
25 Kits in a plastic bag. 2 gel-filled tubes and 2 twist-on connectors per bag. |
Bulk pack of 100 each gel-filled tubes and twist-on connectors. |
25 Kits in a plastic bag. 2 gel-filled tubes and 2 twist-on connectors per bag. |
| Case Data |
Weight, lb (Kg) |
5.1 (2,3) |
3.5 (1,6) |
5.0 (2,3) |
3.5 (1,6) |
| |
Dimensions, in (cm) |
14.25 x 7.625 x 7.5 (36 x 19 x 19) |
13x7.6x6 (33x19x15) |
13x7.6x6 (33x19x15) |
13x7.6x6 (33x19x15) |
| Pallet Data |
Quantities |
75 cases, |
133 cases, |
133 cases, |
133 cases, |
| |
|
7,500 tubes |
6,650 tubes (3,325 kits-of-2) |
13,300 |
6,650 tubes (3,325 kits-of-2) |
| |
Weights, lb (Kg) |
402 (183) |
485 (221) |
665 (302) |
466 (212) |
| |
Dimensions, in (cm) |
48 x 42 x 43 (122 x 107 x 109) |
48 x 42 x 47.5 (122 x 107 x 121) |
42 x 42 x 48 (107 x 107 x 122) |
42 x 42 x 48 (107 x 107 x 122) |
| |
Volume, ft3 ( m3) |
50.2 (1,42) |
55.4 (1,57) |
50.2 (1,42) |
50.2 (1,42) |
|
|
|
| 3.0 |
FEATURES: |
| |
3.1 |
Reduces inventory and SKUs: |
|
|
Replaces the following 3M connectors: DBY,
DBR, DBY-6, DBR-6, DBR/Y, DBY-Kit, DBRKit,
DBY-6-Kit, DBR-6-Kit, DBR/Y-Kit. |
|
|
|
|
3.2 |
Rated for 600 volts: |
|
|
Two connectors for most connections required
in irrigation (conventional and decoder
types) and landscape lighting systems. Listed
under UL486D for USA and Canada, File
E102356. Meets Directive 2006/95/EC and
IEC standards EN61984:2009, EN60998-
1:2004, and EN60998-2-4:2005. |
|
|
|
|
3.3 |
Bulk or Kits-of-two connectors: |
|
|
Each waterproof connector includes the
"Performance Plus" twist-on connector (wire
nut*), and a gel-filled tube |
|
|
|
|
3.4 |
Water Proof and Sunlight Resistant: |
|
|
The DBR/Y-6 may be installed above or
below ground, inside a “valve box” or
buried next to a valve-in-head sprinkler
or light fixture, or submerged in water.
Not to be used in continuous submersion applications |
|
|
|
|
3.5 |
Strain relief: |
|
|
The gel-filled tube includes a lid that
compresses the wire insulation when
closed. This applies a pressure, known
as “strain relief” that keeps the connection
inside the tube when the wires are
pulled-upon. The connector tube
includes channels for three sets of wires. |
|
|
|
| |
3.6 |
Operating temperature: |
| |
|
-40°F to 221°F (-40°C to 105°C) |
| |
3.7 |
Made in the USA by the 3M Company: |
| |
|
Unquestioned quality by a name you
can trust! |
|
