P.O. Box 368, Union, NJ 07083-0368, 908-687-7810, 800-327-2443, Fax: 908-687-8860

CONTROL OR INSTRUMENTATION CABLE INSULATION: HIGH DIELECTRIC PVC JACKET: PVC SIZES: 18 - 10 AWG UL LISTED TYPE TC 600 VOLTS VW-1 RATED, 90°C DRY, 75° WET

1.0 SCOPE: 1.1 This specification covers multiconductor cables having TFFN or VW-1 THHN/ THWN (PVC/Nylon) conductors with an overall polyvinyl chloride (PVC) jacket, conforming to Article 318 "Cable Trays" and Article 340 "Power and Control Cable Type TC" of the 1981 National Electrical Code, and Subject 1277 of Underwriters Laboratories, inc. Meets the requirements of the 70,000 BTU "Cable Tray Propagation Test" per IEEE-383 and shows reserve capabilities by also passing the 210,000 BTU flame test. Rated 600 volts, 90°C dry and 75°C wet. 1.2 Use: UL listed and OSHA acceptable. Recognized for use in Class 1, Division 2 hazardous locations and for installation in trays, wireways, troughs, channels, ducts, and conduit. Specifically approved for direct burial, wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required. Designed for control, power, lighting, telemetering, signals and relay or traffic control. 2.0 CONSTRUCTION: 2.1 Conductors: Bare, soft annealed copper per ASTM B-3 SIZES 18 AND 16 AWG (TFFN) Bunch stranded, class K (.010" #30 strands) ASTM B-174 and UL-62 paragraph 8.1 SIZES 14, 12 AND 10 AWG ((THHN/THWN) Concentric stranded, class C (19 strands) ASTM B-8 and UL-83 table 4.1 2.2 Insulation: HIGH DIELECTRIC POLYVINYL CHLORIDE UL-83 table 13.1 (THWN 75°C) UL-83 table 14.1 (THHN 90°C) UL-62 part 24 class 12B (TFFN 90°C)

THICKNESS UL-83 table 21.5 for THHN/THWN UL-62 table 5.2 for TFFN 2.3 Insulation Armor: NYLON UL-83 paragraph 35.1 for THHN/THWN UL-62 paragraphs 64.1 and 64.2 for TFFN THICKNESS UL-83 table 21.5 for THHN/THWN UL-62 paragraph 68.4 for TFFN 2.4 Cable Assembly: Three or more conductors are assembled round with PVC fillers as needed. A tape binder is applied over the assembly. Two conductors are assembled flat parallel (round, with PVC fillers as needed, is available upon request). 2.5 Overall Jacket: Polyvinyl chloride UL-62 part 22 class 12 Thickness specified herein 2.6 Color Code: Dual color code ICEA Method 1 using solid colors with stripes in accordance with Table K- 2 on one side and a modified ICEA Method 4 using alpha-numerica printing on the other side. (See color code table on back.) 2.7 Markings: Ink print on one side of jacket "(size) AWG Type TC 90°C dry 75°C wet Sunlight Resistant 600V (UL) Direct Burial". Indent print on other side of jacket "(number of conductors)" 2.8 Construction Options: Consult factory for cable specifications with appropriate shields.

3.0	COLOR CODE		4.0	CONDUCTOR DATA
	3.1	ICEA Method 1 using solid colors with spiral stripes in accordance with Table K-2.
Cond. No. Base color Sprial Stripe 1 2 3 4 5 6 7 8 9 10 11 12 Black Red Blue Orange Yellow Brown Red Blue Orange Yellow Brown Black - - - - - Black Black Black Black Black Red Cond. No. Base color Sprial Stripe 13 14 15 16 17 18 19 20 21 22 23 24 Blue Orange Yellow Brown Black Red Orange Yellow Brown Black Red Blue Red Red Red Red Blue Blue Blue Blue Blue Orange Orange Orange Cond. No. Base color Sprial Stripe 25 26 27 28 29 30 31 32 33 34 35 36 Yellow Brown Black Red Blue Orange Brown Black Red Blue Orange Yellow Orange Orange Yellow Yellow Yellow Yellow Yellow Brown Brown Brown Brown Brown				SIZE (AWG) Strands NO/O.D. (inches) PVC Insul. (inches) Nylon Armor (inches) Approx. O.D. (inches) 18 16 14 16/.010 26/.010 19/.0147 .015 .015 .015 .004 .004 .004 .091 .103 .119 12 10 19/.0185 19/.0234 .015 .020 .004 .004 .137 .171

4.01 PART NO.:	TO SPECIFY A SPECIFIC PART NUMBER ADD AWG SIZE, PLUS THE NUMBER OF CONDUCTORS TO THE PART NUMBER, FOR EXAMPLE: 3 CONDUCTORS, 8 AWG IS (P7266D)-8/3
5.0	CABLE DATA:
No. of cond 18 AWG Overall jacket thick- ness (inch) Approx outside diameter (inch) Approx weight 1000FT (pound) 16 AWG Overall jacket thick- ness (inch) Approx outside diameter (inch) Approx weight 1000FT (pound) 14 AWG Overall jacket thick- ness (inch) Approx outside diameter (inch) Approx weight 1000FT (pound) 12 AWG Overall jacket thick- ness (inch) Approx outside diameter (inch) Approx weight 1000FT (pound) 10 AWG Overall jacket thick- ness (inch) Approx outside diameter (inch) Approx weight 1000FT (pound) 2 FL 2 RD 3 4 5 45 45 45 45 45 .20x.29 .29 .30 .32 .35 41 46 50 60 71 45 45 45 45 45 .20x.31 .31 .32 .35 .38 49 54 66 79 94 45 45 45 45 45 .22x.34 .34 .35 .39 .42 64 71 87 107 129 45 45 45 45 45 .24x.37 .37 .39 .43 .47 83 93 113 145 175 45 45 45 45 60 .27x.44 .45 .47 .52 .60 115 127 167 212 269 6 7 8 9 10 45 45 45 45 45 .38 .38 .40 .43 .45 85 89 99 112 121 45 45 45 45 45 .41 .41 .44 .47 .49 109 118 133 147 162 45 45 45 60 60 .46 .46 .49 .56 .58 147 162 184 221 237 45 45 60 60 60 .51 .51 .58 .62 .65 199 223 268 304 327 60 60 60 60 60 .65 .65 .70 .75 .78 317 352 399 445 490 11 12 13 14 15 45 45 45 45 45 .46 .47 .49 .50 .52 130 156 158 160 169 45 45 60 60 60 .51 .52 .57 .59 .60 176 202 217 230 243 60 60 60 60 60 .60 .61 .63 .65 .67 257 281 293 316 340 60 60 60 60 60 .67 .68 .71 .73 .75 357 388 413 442 466 60 60 80 80 80 .81 .83 .90 .93 .95 527 579 657 706 750 16 17 18 19 20 60 60 60 60 60 .56 .57 .59 .59 .60 192 203 214 220 228 60 60 60 60 60 .62 .63 .65 .65 .67 258 274 284 296 310 60 60 60 60 60 .69 .71 .73 .73 .75 356 375 393 408 424 60 60 60 60 80 .77 .80 .82 .82 .88 500 530 558 581 647 80 80 80 80 80 .98 1.01 1.03 1.03 1.056 795 844 893 918 975 21 22 23 24 25 60 60 60 60 60 .62 .63 .64 .65 .66 239 251 259 268 279 60 60 60 60 60 .68 .70 .71 .72 .73 327 340 353 367 379 60 60 60 60 60 .76 .78 .80 .81 .82 450 469 488 508 526 80 80 80 80 80 .90 .92 .94 .95 .97 680 711 738 768 796 80 80 80 80 80 1.08 1.12 1.14 1.15 1.17 1011 1058 1104 1151 1204 26 27 28 29 30 60 60 60 60 60 .67 .67 .69 .69 .71 287 298 306 314 325 60 60 60 60 60 .74 .75 .76 .77 .79 391| 405 418 431 456 80 80 80 80 80 .88 .89 .90 .91 .93 582 601 621 640 666 80 80 80 80 80 .98 .99 1.01 1.02 1.05 822 850 880 907 938 80 80 80 80 80 1.19 1.20 1.23 1.24 1.27 1238 1273 1317 1360 1404 31 32 33 34 35 60 60 60 60 60 .71 .72 .74 .74 .75 333 343 353 361 371 60 60 60 60 80 .79 .81 .82 .83 .88 458 507 522 536 549 80 80 80 80 80 .94 .95 .97 .98 .99 679 698 718 737 756 80 80 80 80 80 1.05 1.07 1.09 1.110 1.11 964 992 1022 1050 1077 The data listed above is approximate and subject to normal manufacturing tolerances. Specifications are subject to change without notice. 36 37 60 60 .77 .77 381 390 80 80 .89 .89 564 580 80 80 1.01 1.01 780 794 80 80 1.13 1.13 1106 1134